Aberdeen Foam 1% AFFF-C6
1% Aqueous Film-Forming Foam (AFFF)
An internationally accredited, high quality Aqueous Film-Forming Foam (AFFF) concentrate.
Designed to quickly extinguish and secure Class B hydrocarbon fires of liquids such as crude oil, gasoline, aviation kerosene and fuel oil.
Formulated for use with either fresh or seawater.
Not suitable for use on fuels which are polar solvents and water miscible such as alcohols, ketones, aldehydes and ethers.
Performance Approvals
Aberdeen Foam 1% AFFF-C6 concentrate is accredited to International Foam Standards:
- Underwriters Laboratory UL 162
- IMO MSC.1/Circ 1312
For further information or to request a copy of our certificate, please contact us.
Environmental impact
- Contain no fluorosurfactants of chain length greater than C6
- Biodegradable (BOD/COD 28 day: >55%)
- Butyl carbitol free
- Low fluorine content (typical value: 1.5% fluorine)
- Low toxicity to aquatic organisms
- Meets European Commission Regulation EU 2017/1000
- Compliant with EPA 2010/15 PFOA Stewardship Programme
For more information on these environmental regulations, please visit our Knowledge Base.
Aberdeen Foam 1% AFFF-C6 concentrate provides quality protection wherever hydrocarbons present a fire risk:
- Offshore platforms and helidecks
- Petrochemical refining, processing and storage facilities
- Marine terminals, power stations and road / rail loading racks
- Rapid Intervention Vehicles and aircraft hangar systems
Produced AFFF foams can also be used as wetting agents for combating Class A fires (i.e.tyres, paper, wood) and for providing a vapour suppression blanket on hydrocarbon spills.
Proportioning Information
Intended for use at 1% (1 part foam concentrate to 99 parts water).
Aberdeen Foam 1% AFFF-C6 concentrate is readily proportioned with the following equipment:
- In-line inductors (fixed or portable)
- Balanced pressure variable flow proportioners
- Around the pump proportioners
- Bladder tank Balanced Pressure proportioning skid
- Handline, aspirating nozzles with fixed inductor pickup tube
Physical properties
|
Appearance |
Clear pale straw liquid |
|
Specific gravity |
1.02 |
|
pH @ 20°C |
7-8 |
|
Viscosity @ 20°C (mPas) |
approx. 4 |
|
Surface tension @ 20°C (N/m) |
0.019 |
|
Freezing point (°C) |
-5 |
|
Lowest use temp. (°C) |
2 |
|
Expansion* |
> 6:0 |
|
25% drainage (minutes) |
> 3.0 |
|
Max. storage temp. (°C) |
49 |
|
Min. storage temp. (°C) |
-1.7 |
|
Freeze/thaw effect |
None |
|
PFOA or PFOA salt content** |
<0.015ppb |
|
PFOA related substance content** |
<0.54ppb |
* Foam quality will depend on the foam equipment used and the operating conditions. The above are tested in accordance with UK Defence Standard 42-40.
** Maximum allowable amounts under European Regulation EU 2017/1000 are <25ppb for PFOA & its salts and <1000ppb for PFOA-related substances.
Additional information
For additional information on fire fighting foam concentrates including C6 foams, foam testing, compatibility, shelf life and pack sizes, please refer to our FAQs section.
